1/16",OD,,ID,,EPDM,022,70A,Industrial Scientific , Hydraulics, Pneumatics Plumbin,$6,Durometer,,1-1/8",Black,,/Bundestag389093.html,W,1",hampaniservices.com,O-Ring, $6 022 EPDM O-Ring, 70A Durometer, Black, 1" ID, 1-1/8" OD, 1/16" W Industrial Scientific Hydraulics, Pneumatics Plumbin 1/16",OD,,ID,,EPDM,022,70A,Industrial Scientific , Hydraulics, Pneumatics Plumbin,$6,Durometer,,1-1/8",Black,,/Bundestag389093.html,W,1",hampaniservices.com,O-Ring, 022 EPDM OFFicial site O-Ring 70A Durometer Black 1" 8" 1 OD 1-1 W 16" ID $6 022 EPDM O-Ring, 70A Durometer, Black, 1" ID, 1-1/8" OD, 1/16" W Industrial Scientific Hydraulics, Pneumatics Plumbin 022 EPDM OFFicial site O-Ring 70A Durometer Black 1" 8" 1 OD 1-1 W 16" ID

022 EPDM OFFicial site NEW O-Ring 70A Durometer Black 1

022 EPDM O-Ring, 70A Durometer, Black, 1" ID, 1-1/8" OD, 1/16" W

$6

022 EPDM O-Ring, 70A Durometer, Black, 1" ID, 1-1/8" OD, 1/16" W

|||

Product description

This EPDM O-ring is black in color, round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications.

EPDM is acceptable for temperature applications between -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C). It is compatible for use with water and steam, silicone oil and grease, polar solvents (alcohols), acids, glycol-based brake fluids, ozone, and weathering. It is vulnerable to many oils, gasoline, and solvents. This material meets ASTM International standards.

This EPDM O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This EPDM O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

022 EPDM O-Ring, 70A Durometer, Black, 1" ID, 1-1/8" OD, 1/16" W

TV Listing
;